Permethrin 10%
Price:
SKU:
19450-504
Availability:
In Stock
- Permethrin 10% is a broad spectrum multi-use insecticide
- Acts fast and controls pests for up to 4 weeks
- Kills flies, fleas, lice, mites, ticks, cockroaches, mosquitoes, spiders, gnats, and more
+
Wishlist
Product Details
- Permethrin 10% is a broad spectrum multi-use insecticide
- Acts fast and controls pests for up to 4 weeks
- Kills flies, fleas, lice, mites, ticks, cockroaches, mosquitoes, spiders, gnats, and more
- Use in and around kennels, stables, cattle yards, homes as well as on certain animals
- Labeled for dogs, cattle, horses, sheep, goats, swine, and poultry
- Never use permethrin products on or around cats
Permethrin 10% is a powerful pesticide that can be used in a wide variety of applications. Quickly kills flies, fleas, lice, mites, ticks, cockroaches and keeps control for 28-days after application. Applications include indoor and outdoor premise pest control in and around kennels, stables, barns, cattle yards, and houses as well as flea, lice, tick and mite control on certain animals. Labeled for dogs, cattle, horses, sheep, goats, swine, and poultry. Do not use on cats. Do not use around food or food preparation. Label may be different than shown.
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Indoor Use:
To control cockroaches, waterbugs, palmetto bugs, ants, silverfish, firebrats, spiders, crickets, millipedes, clover mites, cheese mites, granary weevils, rice weevils, confused flour beetles, rust red flour beetles, saw-toothed grain beetles, spider beetles, cigarette beetles, drugstore beetles, mealworms, grain mites and cadelles.
To control centipedes, ground beetles, pillbugs, sowbugs, scorpions and ticks.
To control fleas and ticks on pet bedding, rugs and carpets.
To kill fleas and ticks on dogs. Note: Do not use on dogs under 12 weeks old. Consult a veterinarian before using this product on medicated, debilitated, aged, pregnant or nursing animals. Sensitivities may occur after using ANY pesticide product for pets. If signs of sensitivity occur, bathe your pet with mild soap and rinse with large amounts of water. If signs continue, consult a veterinarian immediately.
To control landing places for mosquitoes, gnats, skippers; treat walls, ceilings, moldings, screens, door frames, window frames, beams, light cords and similar resting places.
Outdoor Use:
To control insects on ornamental plants, lawns, trees and shrubs, roses and flowers.
To control horn flies, face flies, stable flies, ear ticks, mosquitoes, lice, mange mites of animals and in animal quarters, cattle barns, horse barns swine houses, kennels, milking parlors, milk rooms, dairies, poultry houses, feedlots and stables.
Storage:
Do not use or store near heat or open flame. Do not use this product in or on electrical equipment due to the possibility of shock hazard.
Keep out of the reach of children.
Indoor Use:
To control cockroaches, waterbugs, palmetto bugs, ants, silverfish, firebrats, spiders, crickets, millipedes, clover mites, cheese mites, granary weevils, rice weevils, confused flour beetles, rust red flour beetles, saw-toothed grain beetles, spider beetles, cigarette beetles, drugstore beetles, mealworms, grain mites and cadelles.
To control centipedes, ground beetles, pillbugs, sowbugs, scorpions and ticks.
To control fleas and ticks on pet bedding, rugs and carpets.
To kill fleas and ticks on dogs. Note: Do not use on dogs under 12 weeks old. Consult a veterinarian before using this product on medicated, debilitated, aged, pregnant or nursing animals. Sensitivities may occur after using ANY pesticide product for pets. If signs of sensitivity occur, bathe your pet with mild soap and rinse with large amounts of water. If signs continue, consult a veterinarian immediately.
To control landing places for mosquitoes, gnats, skippers; treat walls, ceilings, moldings, screens, door frames, window frames, beams, light cords and similar resting places.
Outdoor Use:
To control insects on ornamental plants, lawns, trees and shrubs, roses and flowers.
To control horn flies, face flies, stable flies, ear ticks, mosquitoes, lice, mange mites of animals and in animal quarters, cattle barns, horse barns swine houses, kennels, milking parlors, milk rooms, dairies, poultry houses, feedlots and stables.
Storage:
Do not use or store near heat or open flame. Do not use this product in or on electrical equipment due to the possibility of shock hazard.
Keep out of the reach of children.
See product label for specific directions and dosages. Products may vary slightly from label to label.
General Directions for Use:
Shake well. Do not allow people or pets in treated areas until sprays have dried. Remove pets, birds and cover fish aquaria before spraying.
Do not allow spray treatment to drift onto pastureland, cropland, poultry ranges or water supplies. Do not use on crops used for food, forage or pasture. Do not apply by air.
For outdoor applications:
Do not water the treated area to the point of run-off. Do not make applications during rain.
All outdoor applications must be limited to spot or crack-and-crevice treatments only, except for the following permitted uses: treatment to soil or vegetation around structures; applications to lawns, turf, and other vegetation; applications to building foundations, up to a maximum height of 3 feet.
Other than applications to building foundations, all outdoor applications to impervious surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as windows, doors and eaves) are limited to spot and crack-and-crevice applications, only.
Application is prohibited directly into sewers or drains, or to any area like a gutter where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur. Do not allow the product to enter any drain during or after application.
Mixing instructions: This is an easy-to-apply product that can be used to control nuisance insects. Apply with hand pressurized or power operated sprayers. Carefully measure and mix the amount of product and water as directed. Where appropriate, measure the area to be treated by measuring the length and the width then multiply to determine the square footage of the area. When mixing, fill the application equipment with half of the water first and then measure and add the appropriate amount of Permethrin 10% followed by the remaining water. Shake or stir thoroughly to mix the product and water. Thorough spray coverage is necessary but do not allow run-off.
For maximum effectiveness, a combination of localized application and space treatment is recommended.
General Directions for Use:
Shake well. Do not allow people or pets in treated areas until sprays have dried. Remove pets, birds and cover fish aquaria before spraying.
Do not allow spray treatment to drift onto pastureland, cropland, poultry ranges or water supplies. Do not use on crops used for food, forage or pasture. Do not apply by air.
For outdoor applications:
Do not water the treated area to the point of run-off. Do not make applications during rain.
All outdoor applications must be limited to spot or crack-and-crevice treatments only, except for the following permitted uses: treatment to soil or vegetation around structures; applications to lawns, turf, and other vegetation; applications to building foundations, up to a maximum height of 3 feet.
Other than applications to building foundations, all outdoor applications to impervious surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as windows, doors and eaves) are limited to spot and crack-and-crevice applications, only.
Application is prohibited directly into sewers or drains, or to any area like a gutter where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur. Do not allow the product to enter any drain during or after application.
Mixing instructions: This is an easy-to-apply product that can be used to control nuisance insects. Apply with hand pressurized or power operated sprayers. Carefully measure and mix the amount of product and water as directed. Where appropriate, measure the area to be treated by measuring the length and the width then multiply to determine the square footage of the area. When mixing, fill the application equipment with half of the water first and then measure and add the appropriate amount of Permethrin 10% followed by the remaining water. Shake or stir thoroughly to mix the product and water. Thorough spray coverage is necessary but do not allow run-off.
For maximum effectiveness, a combination of localized application and space treatment is recommended.
Active ingredient: 10% Permethrin
You May Also Like
Customer Reviews