High Tech Pet Power Pet Doors are engineered for performance, design, value and extreme reliability. Power Pet Doors are motor driven and activated by a tiny ultrasonic collar. The transmitter collar tells the door how far your pet is away and which direction your pet is traveling. The door opens only when your pet is on a direct approach. The translucent door panel is made of a new super-strength resin. When your pet approaches, the air-tight panel quickly and quietly powers upward, disappearing into the stylish housing. It opens just like an automatic car window, only faster. Your pet can come and go but strays and strangers stay out. An automatic dead-bolt adds a higher level of security. You choose the type of access; full in and out, in only, out only, closed and locked. Dual range controls let you set independent inside and outside activation distances. These doors are completely wind and weather-proof with an air-tight seal. The pre-fabricated outside frame gives a professionally finished look. PX-1
is 12"W x 28.625"H with a door opening of 8.25"W x 10"H and made for cats and dogs up to 30 lbs. The PX-2
is 16"W x 40.625"H and less with a door opening of 12.25"W x 16"H and made for pets up to 90 lbs. Both are less than 2"D and operate on an AC adapter (included). The Power Pet Battery Charger Kit
with backup battery for your Power Pet Door includes charger base, AC adapter and one rechargeable B12V-1.3 backup battery. Allows you to operate your Power Pet Door in battery-only mode, eliminating the need for an AC wall connection. For battery-only operation, purchase an additional backup battery; then use one battery in your Power Pet door and keep the other in the charger base. When your pet door battery runs low, just swap. Battery change takes less than 30-seconds. Door is also operated by the waterproof MS-5 Transmitter Collar
and the Humane Contain RX-10 multi-function collar
. The PX-1 Power Pet Door Medium and the PX-2 Power Pet Door Large come in clamshell packaging and include a standard water-resistant MS-4 Transmitter Collar
with battery, standard door mount and AC adapter. Extras and accessories are sold separately. Shipped directly from manufacturer.
Mount to the surface of your wall or door. It does not require a larger opening. Cut out an opening in your door or wall equal to the panel size. Install Power Pet Door with 8 screws. For wall installations insert the optional wall adapter tunnel (sold separately). Install the pre-made outside frame with 10 screws. The pre-fabricated OUTSIDE FRAME (included) gives a professionally finished look to any door or wall.